Reinforced scissor jack 1,5 tm.

Black

1,5 tonnes

Minimum height: 105 mm

Maximum height: 395 mm

1 mechanical car scissor jack

The scissor jack is ideal for lifting cars. This mechanical jack can support up to 1,5 tonnes, with a minimum height of 105 mm and a maximum of 395 mm.

Its size makes it easy to carry, so you can always keep it in your car boot without taking up too much space, ready to use in an emergency.

The mechanical car scissor jack also has TUV and GS certifications, ensuring the highest quality.

The scissor jack is therefore an ideal accessory for lifting your car and dealing with unexpected problems. Always check your vehicle’s weight and follow the safety instructions.

• Do not exceed the load capacity.
• The base of the scissor jack must be on a firm, completely level surface during use.
• Do not work underneath the car without additional support.
• Do not use the jack at an angle or horizontally.
• The car must be in full contact with the jack’s upper support surface
• Secure the car before lifting.
• The pressure is factory-set and does not require user adjustment.

• Position the vehicle on a level surface.
• Apply the handbrake. For vehicles with an automatic gearbox, select «P». For vehicles with a manual gearbox, select first gear or reverse.
• Chock the wheels to prevent movement.
• Position the jack at the designated jacking point for the vehicle.
• Do not raise the jack higher than necessary.
• Do not go underneath the vehicle while it is supported by the jack.
• NEVER place objects between the ground and the base of the jack, or between the top of the jack and the vehicle being lifted, to increase its working height.
• Whenever possible, support the raised vehicle on axle stands.